Electric Locks & Maglocks in Perth and Kinross
Electric Locks & Maglocks across Perth and Kinross, installed by engineers who work on these systems every week and commission them properly before handover.
- We survey, quote in writing, and only then book the install. No estimates over the phone that change on the day.
- Our engineers cover Perth and Kinross as part of their standing area, so survey visits are usually arranged within a few working days.
- Fire-compliant locking and release on escape routes
- All makes installed, repaired and maintained
Electric Locks & Maglocks explained
The lock is the part that actually holds the door. Getting it right — and getting the fail-safe or fail-secure decision right — is the difference between a secure door and a dangerous one.
In Perth and Kinross this tends to be specified in one of two situations: a new fit-out where it can be designed in cleanly, or a retrofit where cable routes and existing door hardware dictate half the answer. Both are routine for us; they are just priced differently.
Where it gets used across Perth and Kinross
Every access-controlled door, on every type of building.
- Healthcare and care homes — step-free automated entry, staff-only zones and fail-safe escape routes.
- Warehouses and depots — vehicle gate control, personnel doors and turnstiles on the pedestrian route.
- Retail and hospitality — back-of-house control, cash-office restriction and CCTV-linked door events.
- Commercial premises — multi-door fob or card systems with access levels, time zones and a full audit trail.
What you actually get
- Magnetic locks from 280kg to 545kg holding force
- Electric strikes, solenoid bolts and motorised multi-point locks
- Fail-safe locks on escape routes, released by the fire alarm
Specifying it well
- Match holding force to the door, not to a catalogue headline
- Glass doors need a specific bracket set; don't let anyone improvise one
- Fire escape doors almost always need fail-safe locking and free egress
How the job runs
An engineer attends the site, checks each opening, confirms the cable route and establishes how the fire strategy affects the locking. You get a written quotation itemised per door with the hardware named. Nothing is ordered until you approve it. We survey, quote in writing, and only then book the install. No estimates over the phone that change on the day.
Commissioning is part of the job, not an extra visit. You finish with a working system, a tested fire interface, and a named person on your team who knows how to administer it.
Coverage in Perth and Kinross
Our engineers cover Perth and Kinross as part of their standing area, so survey visits are usually arranged within a few working days. We work to Perth and across the PH postcode area, covering 1 named town in Perth and Kinross plus the surrounding villages and out-of-town estates.
Electric Locks & Maglocks in Perth and Kinross towns
Other systems we install in Perth and Kinross
Electric Locks & Maglocks in Perth and Kinross — questions
Do you install electric locks & maglocks in Perth and Kinross?
Yes. Perth and Kinross is part of our regular Scotland coverage and electric locks & maglocks is one of our core services. Give us the postcode and the number of doors when you enquire and we will confirm a survey slot.
What does electric locks & maglocks cost in Perth and Kinross?
Pricing is driven by door count and hardware rather than county. As a guide, a single controlled door lands between £750 and £1,500 installed, with multi-door sites working out at £600 to £1,100 per door. The survey is free and the written quote is fixed.
What is the difference between fail-safe and fail-secure?
A fail-safe lock releases when power is lost — used on escape routes. A fail-secure lock stays locked when power is lost — used where security must survive an outage. The fire strategy for the building decides which goes where.
Is a maglock legal on a fire exit?
Yes, when it is fail-safe, interfaced to the fire alarm, fitted with a green emergency break-glass release, and free egress is maintained. Fitted any other way it is a serious life-safety risk.
Can access control be linked to CCTV?
Yes, where both systems support a common integration. Every door event gets a matching video bookmark, so instead of scrubbing hours of footage you click the event and watch it. We check compatibility at survey before anything is ordered.
How much does access control installation cost in the UK?
A single controlled door with a reader, lock and controller typically costs between £750 and £1,500 installed. Multi-door systems usually work out between £600 and £1,100 per door, because the controller and software cost is shared across the doors. Door hardware, cable runs and any fire alarm interfacing move the figure most, which is why we survey before quoting rather than pricing blind.
How long does an access control system take to install?
A single door is normally half a day to a day. A typical 8 to 12 door commercial system takes two to four days on site, followed by a commissioning visit to load users, set access levels and hand over. Larger sites are phased so the building stays secure throughout.
Get a fixed price for your doors in Perth and Kinross
Free survey, itemised quotation, and a system that still works on the day the fire alarm goes off.